As in – stuff happens. I’ve not been posting so much, as Blondie AKA the Daughter Unit and I are coming down the home stretch – maybe, hopefully, eventually – on a huge autobiographical project for a Watercress client. This client, to put it kindly, has had an interesting life, with lots of interesting friends, and is situated economically far up enough on the scale of things to be able to get exactly what he wants, and to pay the full freight for it. This is a project which … well, it took up about half a year, just getting to the point of writing up the contract, then lay fallow for another year, during which I about wrote it off entirely, and then in October of 2014, we had a signed contract and a check … and a possible deadline of April of this year, which we have blown pretty much past. The professional ghostwriter for this magnum opus has been working on it for more than six years, so I have no reason to feel especially burdened.

Almost the last bit we have to do is to carefully review the hard-copy printed version, and track down and ruthlessly slaughter any remaining misspellings, punctuation omissions, and spacing issues. Yes – I am training up Blondie/Daughter Unit in the detailed ways of the Tiny Publishing Bidness, and pinning her foot to the floor, metaphorically speaking, in learning the Ten Commandments of Watercress, better known as the Chicago Manual of Style. So – that’s been the main project this week, that and finishing off the last of the Armoire project. Yes, the armoire which we scavenged from the curb slightly ahead of the professional junker who had his eye on it, is all but done – all but the lower skirting on the right and left sides. The final item waiting the armoire’s final transformation into a media cabinet was that we needed to build the shelving unit to hold the TV, and a collection of DVD’s, which would fit into the armoire like a hand sliding into a well-fitting glove, and of course I am not well-paid sufficiently as a writer to be able to whistle one of those up from a bespoke cabinet-maker.

Off to Home Depot/Lowe’s, once the payment for another project was accomplished, armed with a set of measurements and an idea in mind for a set of shelves to fit a single row of DVD cases – with two smaller half-width sliding shelf units, which would shift from side to side, thus eliminating the need to stack them two-deep … which is a major pain, and makes it extremely difficult to locate certain movies, which I ABSOLUTELY KNOW that I have, but which I cannot locate under the current system. The nice and faintly harried young salesman at Home Depot obligingly cut the sheet of cabinet-grade plywood into the shapes needed for the main cabinet, but the smaller scraps had to wait upon the courtesy of our near neighbor, the amateur wood-worker, who has a whole garage full of tools, and a monumental half-finished chest made of native cedar planks that he is constructing as a wedding present for a nephew, which will be the woodworker’s marvel of the world once that he gets finished with it. (Yes, for every artistic masterpiece in the world, there is an artist … and another one who tells him that he is DONE!) Anyway, the neighborhood woodworker obligingly ripped the plywood scraps into a number of 5 ½” wide lengths, from which we constructed the two half-width moving segments. We assembled and stained them to match the armoire, discovering in the process that we absolutely suck at applying glue – as there are too many patches where the excess glue soaked in to make a really professional-appearing final product once the stain was applied. It fits quite neatly into the armoire – but on continuing consideration, we think that we will remove the rollers underneath, before we go any farther. They make it too tippy, too unstable, even with the shelf unit inserted.

But still … what we have is useful, and doesn’t look all that bad, considering. Which brings us up to the eventual kitchen renovation; since we had a fairly easy time building the shelf-unit, what with everything cut to exact size … how hard would it be, to hire the neighborhood Handy Guy (who helped us install the Marvelous Carved Front Door) to build the cabinet frames for base and wall shelf units? The kitchen is such an odd and small size, and our requirements – for instance, for the wall units to go all the way up to the ceiling – unlikely to be met by prefab cabinets. It was simple enough, making a plain box of a certain dimension from a sheet of cabinet-grade plywood. Looking around, it seems that door and drawer units in custom sizes, plus tambour door kits, plate racks, and pull-out pantry shelves are readily available for much less than the cost of a complete cabinet unit. We’d also have to do this in segments over time – wall cabinets, kitchen floor and base cabinets in two sections, countertop, tile backsplash and sink … and this way, when we were done, all of it would match. It would about double the storage space in the kitchen, once completed. So – that’s the plan; now to see what Handy Guy says.